Does anyone know of a firm (preferably Midlands) who can re-plastic a steering wheel from a 33 Box Saloon ?

Any help appreciated.

Location: Nottinghamshire

Talk to Ian Dunford here

Ian Mc.

Location: Shropshire

Paul I am sure you will find some one.. A word of caution. the pre preparation of the wheel is essential.the wheel should be bead blasted and all imperfections attended to first.. the covering, in my experience will not cover them.Use metallic filler. I remember my first one ,when I just gave it to them as was,expecting all imperfections to be covered by the coating. A big no. if it has the hand grips as little separate bits ,they will have to have the seams filled. also mask off the centre yourself. masking tape is not good enough ,you will need a heat proof tape. hope it helps...

Location: Ferring. west susex

As Ian McG says, talk to Ian Dunford. I have a similar wheel that needs the same work and that's what I'll be doing.

Steve

Location: Nr. Selby, North Yorkshire

Hello Paul,

I believe what you are looking for is known as polydip coating,

I do not recommend shot blasting but either glass or soda blasting the wheel first

Regards,

Doug Baker

Location: Scarborough Western Australia

Very many thanks for all the replies.

Paul

Location: Nottinghamshire